Filter
Top Products
78
US
You can set the “BT Standby” (Bluetooth
Standby) mode so that the receiver can be
controlled by the Bluetooth device even
when the receiver is in standby mode.
1 Select “Listen” from the home menu,
then press .
2 Select “BLUETOOTH”, then press
.
3 Press OPTIONS.
4 Select “BT Standby”, then press
.
5 Select “On”, then press .
The receiver turns on automatically
when the Bluetooth device is
connected to the receiver.
To turn off this function
Select “Off” in step 5, then press .
• When the receiver is in standby mode, the ?/1
(on/standby) indicator on the front panel lights
up in amber if “BT Standby” is set to “On”.
• You can only select this parameter when a
Bluetooth device is paired.
You can enable or disable AAC (Advanced
Audio Coding) audio.
1 Select “BT AAC” in step 4 in
“Setting the Bluetooth Standby
mode”, then press .
2 Select “On” or “Off”, then press
.
• On: AAC audio is available.
• Off: AAC audio is not available.
To turn off this function
Select “Off” in step 2, then press .
• You can enjoy high quality sound if the AAC is
enabled.
• When you change the setting, the Bluetooth
device is disconnected from the receiver
automatically.
Select “Address Info” in step 4 in
“Setting the Bluetooth Standby mode”,
then press .
Address info appears on the TV screen.
You can check the Bluetooth device information
by pressing DISPLAY repeatedly.
Each time you press DISPLAY, the display will
change cyclically as follows:
Bluetooth device name
t Bluetooth device
address
t Sound field currently applied t
Volume level
t Input you selected
Setting the Bluetooth
Standby mode
Notes
Setting the Bluetooth
audio codecs
Notes
Checking the
information of a
connected Bluetooth
device
Tip