Filter
Top Products
MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Turning on the receiver
When you have made all connections with the other devices, connect the AC power cord (mains lead), then
turn on the receiver.
1. Connect the AC power cord (mains lead) to a wall outlet.
2. Press (on/standby) to turn on the receiver.
You can also turn on the receiver using (on/standby) on the remote control. To turn off the receiver,
press (on/standby) again.
Note
After you turn off the receiver, [STANDBY] flashes on the display panel. Do not disconnect the AC power
cord (mains lead) while [STANDBY] is flashing. This may cause a malfunction.
Notes on use
4-488-933-11(1)
Copyright 2014 Sony Corporation
Help Guide
73