Filter
Top Products
88
US
Changing the display
You can check the sound field, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows:
All inputs except the FM and AM
band
Index name of the input* t Selected input t
Sound field currently applied t Volume level
t Stream info
FM and AM band
Preset station name* t Frequency t Sound
field currently applied t Volume level
XM Radio
Channel name t Channel number t
Category name t Artist name/Feature t
Song/program title t Signal strength t
Sound field currently applied t Volume level
* Index name appears only when you have assigned
one to the input or preset station (page 67, 87).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
Note
Character or marks may not be displayed for some
languages.
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
“SLEEP” lights up in the display.
Each time you press the button, the display
changes cyclically as follows:
OFF t 0:30:00 t 1:00:00 t 1:30:00 t
2:00:00
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.