Filter
Top Products
7
GB
Getting Started
Name Function
G DTS/
DTS-ES/
DTS 96/24
“DTS” lights up when the
receiver is decoding DTS
signals. “DTS-ES” lights up
when the receiver is decoding
DTS-ES signals. “DTS 96/24”
lights up when the receiver is
decoding DTS 96/24 (96 kHz/
24 bit) signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is not set to
“ANALOG” (page 60).
H MEMORY Lights up when a memory
function, such as Preset
Memory (page 56), etc., is
activated.
I Tuner
indicators
Lights up when using the
receiver to tune in radio
stations (page 54), etc.
Note
“RDS” appears for models of
area code CEL, CEK only.
J Preset
station
indicators
Lights up when using the
receiver to tune in radio
stations you have preset. For
details on presetting radio
stations, see page 56.
K D.RANGE Lights up when dynamic range
compression is activated (page
36).
L NEO:6 Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 49).
M COAX Lights up when INPUT MODE
is set to “AUTO IN” and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to
“COAX IN” (page 60)
N HDMI Lights up when the receiver
recognizes a component
connected via a HDMI IN jack
(page 17).
Name Function
O Playback
channel
indicators
L
R
C
SL
SR
S
SB
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When
surround speakers are set to
“NO” (page 38)
Sound Field: A.F.D. AUTO
SW
LCR
SL SR