Filter
Top Products
31
GB
C:\Documents and
Settings\pc13\Desktop\JC060685_2662257111DG300_GB\2662257111\GB06SEL_STR-DG300-
CEL.fm
masterpage: Right
STR-DG300
2-662-257-11 (1)
Selecting a Sound Field
About DCS (Digital Cinema
Sound)
Sound fields with DCS mark use DCS
technology.
DCS is a unique sound reproduction
technology for home theater developed by
Sony, in cooperation with Sony Pictures
Entertainment, for enjoying the exciting and
powerful sound of movie theaters at home.
With this “Digital Cinema Sound” developed
by integrating a DSP (Digital signal processor)
and measured data, the ideal sound field
intended by film makers can be experienced at
home.
Note
This function does not work in the following cases:
– ANALOG DIRECT is selected.
– For signals with a sampling frequency of more
than 48 kHz.
Tip
You can identify the encoding format of DVD
software, etc., by looking at the logo on the package.
• : Dolby Digital discs
• : Dolby Surround
encoded programs
• : DTS Digital Surround encoded programs
To turn off the surround effect
for movie/music
Press A.F.D.
Listening to the sound
without any adjustment
(ANALOG DIRECT)
You can switch the audio of the selected input
to two channel analog input. This function
enables you to enjoy high quality analog
sources.
When using this function, only the volume and
front speaker balance can be adjusted.
1 Turn INPUT SELECTOR on the
receiver to select the input you
want to listen to in analog
audio.
You can also use the input buttons on the
remote.
2 Press DIRECT on the receiver.
The analog audio is output.
Note
When headphone is connected, “HP DIR” appears
on the display.
?/1
VIDEO 3 IN/
PORTABLE AUDIO IN
SPEAKERS
(OFF/A/B/A+B)
PHONES
TREBLEBASS A.F.D. MOVIE MUSIC DIRECT
TUNING MODE
DISPLAY INPUT MODE
INPUT SELECTOR
TUNING
–+
WOOFER
ON/OFF
MUTING
MASTER VOLUME
12
GB01COV_STR-DG300-CEL.book Page 31 Monday, May 22, 2006 7:39 AM