Filter
Top Products
87
GB
Tuner Operations
You can restrict access to certain channels
using your own lock code. The lock code is set
to “0000” as the default.
Change the lock code before you use this
function for the first time (see “To change the
lock code”).
1 Make sure that the AMP button
is lit.
If it is not lit, or “GUI MODE” is not
displayed in the display window of the
receiver, follow the steps given in “7:
Operating the receiver using the GUI
(Graphical User Interface)” (page 38).
2 Press V/v repeatedly to select
“SIRIUS,” then press or b.
3 Select a channel you want to
lock using Category Tuning
(page 84) or Direct Tuning
(page 85).
4 Press OPTIONS, then press V/v
to select “Parental Lock,” then
press or b.
5 Press V/v repeatedly to select
“ON,” then press .
“Enter your 4-digit lock code.” appears.
6 Enter your 4-digit lock code
using the number buttons.
“The channel has been locked.” appears
and the Parental Lock is set.
To delete the numbers you have entered,
go back to step 4 by pressing RETURN/
EXIT O, and then repeat the procedure
above from step 4.
Restricting access to specific
channels (Parental Lock)
(SIRIUS only)
1
2,
4,5
4
6
continued