masterpage:Left
lename[E:\SEM_Janet\Data_DE998\J9041624_2580804111DE998U\2580804111\GB09ADD_
S
TR-DE998-U.fm]
60
US
model name1[STR-DE998]
[2-580-804-11(1)]
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(Models of area code U only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 110 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Power output
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
110 W + 110 W
1)
(8 ohms 1 kHz, THD 0.7%)
120 W + 120 W
1)
(8 ohms 1 kHz, THD 10%)
150 W + 150 W
1)
Reference Power Output
1)
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
FRONT
2)
: 110 W/ch
CENTER
2)
: 110 W
SURR
2)
: 110 W/ch
SURR BACK
2)
: 110 W/ch
(8 ohms 1 kHz, THD 0.7%)
FRONT
2)
: 120 W/ch
CENTER
2)
: 120 W
SURR
2)
: 120 W/ch
SURR BACK
2)
: 120 W/ch
(8 ohms 1 kHz, THD 10%)
FRONT
2)
: 150 W/ch
CENTER
2)
: 150 W
SURR
2)
: 150 W/ch
SURR BACK
2)
: 150 W/ch
1) Measured under the following conditions:
2) Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
Inputs (Analog)
3) INPUT SHORT (with sound field and equalizer
bypassed).
4) Weighted network, input level.
Inputs (Digital)
Outputs (Analog)
Outputs (Digital)
Equalizer
Specifications
Area code Power requirements
U, CA 120 V AC, 60 Hz
PHONO RIAA equalization curve
±0.5 dB
MULTI CH IN,
SA-CD/CD, TV/SAT,
MD/TAPE, DVD,
VIDEO 1, 2, 3
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and equalizer
bypassed)
PHONO Sensitivity: 8 mV
Impedance: 50 k ohms
S/N
3)
: 86 dB
(A, 8 mV
4)
)
MULTI CH IN,
SA-CD/CD, TV/SAT,
MD/TAPE, DVD,
VIDEO 1, 2, 3
Sensitivity: 500 mV
Impedance: 50 k ohms
S/N
3)
: 96 dB
(A, 500 mV
4)
)
DVD, SA-CD/CD
(Coaxial)
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
TV/SAT, SA-CD/CD,
MD/TAPE, VIDEO 3
(Optical)
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
MD/TAPE (OUT),
VIDEO 1, 2
(AUDIO OUT)
Voltage: 500 mV
Impedance: 10 k ohms
SUB WOOFER Voltage: 2 V
Impedance: 1 k ohm
MD/TAPE (Optical) Sensitivity: –
Gain levels ±10 dB, 0.5 dB step
GB01COV_STR-DE998-U.book Page 60 Monday, January 17, 2005 2:49 PM