Filter
Top Products
7
GB
Getting Started
Receiver
DVD/MULTI CH
FRONT SURROUND
CENTER
SUB
WOOFER
L
R
FRONT
SURROUND
CENTER
SUB
WOOFER
PRE OUT
You can play decoded Dolby Digital soundtracks through the
speakers connected to the receiver.
If you have a DVD player or a Dolby Digital decoder
with 5.1 CH output, you can amplify a decoded Dolby
Digital soundtrack with the following connections.
Note
If you have a DVD player with 2 CH analog output, connect
it to another function jack.
Where do I go next?
Go on to the next section to connect the speakers.
Speaker System Hookups
Overview
This section describes how to connect your speakers to
the receiver. Although front (left and right) speakers
are required, centre and surround speakers are
optional. Adding centre and surround speakers will
enhance the surround effects. Connecting an active
woofer will increase bass response. For specific
locations of the terminals, see the illustration below.
For optimum surround sound effect, place your
speakers as shown below.
What cords will I need?
Speaker cord (not supplied) (1 for each speaker)
Twist the stripped ends of the cord about 15 mm (2/3 inch).
Be sure to match the speaker cord to the appropriate
terminal on the components: + to + and – to –. If the cords
are reversed, the sound will be distorted and will lack bass.
Hookups
Front Speakers
Surround and centre speakers
SPEAKERS FRONT
SUB WOOFER
SPEAKERS SURROUND
SPEAKERS CENTER
60 - 90 cm
Surround
speaker
(+)(+)
(–)
(–)
45°
Front speaker
(R)
Front speaker
(L)
Receiver
Receiver
Surround
speaker
(R)
Surround
speaker
(L)
Centre speaker
SPEAKERS
FRONT
R
L
SPEAKERS
SURROUND
LR
CENTER
(continued)
DVD player