Filter
Top Products
46
x Digital power management
(D.POWER)
Lets you enjoy the analog source without the
influence of digital circuits.
• “AUTO OFF” turns off the power of the
unnecessary digital circuits automatically when
you use analog inputs or functions that bypass
digital processing when MULTI/2CH A.
DIRECT function is used.
• “ALWAYS ON” keeps the power of digital
circuits on. Select if you do not like the time lag
that occurs with the “AUTO OFF” setting when
digital circuits are turned on, etc.
x Video power management
(V.POWER)
Lets you enjoy the sound without the influence
of the video circuits.
• “AUTO OFF” turns off the power of video
circuits automatically when there are
unnecessary.
• “ALWAYS ON” keeps the power of video
circuits on. Depending on the monitor, noise
may be produced or the picture may be
distorted when the power of the video circuits is
turned on. In this case, select “ALWAYS ON”.
x Sound field link (S.FIELD LINK)
Lets you apply the last selected sound field to a
program source whenever it is selected. For
example, if you listen to CD with STADIUM
as the sound field, change to a different
program source, then return to CD, STADIUM
will be applied again.
x CONTROL A1 auto power on
(A1 AUTO POWER)
Lets you turn on the receiver automatically
when the component connected via CONTROL
A1 cords (see page 14) is turned on and the
playback is started.
When set to “OFF”, you can save the power
consumption of the receiver during standby
mode.
x CONTROL A1 auto function
(AUTO FUNCTION)
Lets you switch the function of this receiver to
the Sony components connected via CONTROL
A1 cords (see page 14) automatically when the
connected component is set to play mode.
x 2nd room speaker (2ND ROOM SP)
(STR-DB1070 area code U, CA only)
Lets you set whether you would output the
sound to the 2nd room or not.
x Selecting the command mode of
the remote (COMMAND MODE)
Lets you select the command mode of the
remote. Change the command mode when you
use 2 Sony receivers in the same room.
x Monitor color system (COLOR
SYSTEM)
(STR-DB1070 area code other than
U, CA)
Lets you select the color system of your TV
monitor.
x Color of the on-screen display
(OSD)
(STR-DB1070 only)
Lets you select the color of the on-screen
display.
x OSD horizontal position (OSD
H.POSITION)
(STR-DB1070 only)
Lets you adjust the position of the on-screen
display horizontally.
x OSD vertical position (OSD
V.POSITION)
(STR-DB1070 only)
Lets you adjust the position of the on-screen
display vertically.
Adjustments using the SET UP button
(continued)