Sony STR-DB870 Stereo System User Manual


 
13
Hooking Up the Components
L
R
MULTI CH OUT
FRONT
SURROUND
CENTER
SURROUND
BACK
SUB
WOOFER
MULTI CH IN (STR-DB870)
MULTI CH IN 2 (STR-DB1070)
AFAFF
MULTI CH IN 1*
PHONO
CD/SACD
MD/DAT TAPE
IN IN
OUT
IN
MULTI CH IN 2
OUT OUT
IN
SIGNAL
GND
U
CONTROL
A1
FRONT
SURROUND
CENTER
2ND ROOM
SUB
WOOFER
L
R
L
R
L
R
L
R
MONITOR
OUT
COM
MONITOR
AUDIO
IN
IN
VIDEO
CTRL S
OUT
OUT
VIDEO
CTRL S
OUT
CTRL S
STATUS IN
CTRL S
IN
AUDIO
OUT
VIDEO 1
AUDIO
IN
TV/SAT
AUDIO
IN
DVD/LD
AUDIO
IN
AUDIO
OUT
VIDEO 2
S-VIDEO
IN
VIDEO
S-VIDEO
OUT
VIDEO
S-VIDEO
IN
VIDEO
S-VIDEO
IN
VIDEO
S-VIDEO
OUT
VIDEO
MULTI CH IN 1
FRONT
SURROUND
CENTER
SURROUND
BACK
SUB
WOOFER
DIGITAL ANTENNA
MD/DAT
OPTICAL
IN
TV/SAT
OPTICAL
IN
DVD/LD
OPTICAL
IN
FM
75
COAXIAL
DVD/LD
COAXIAL
IN
MD/DAT
OPTICAL
OUT
AM
U
Multi channel input hookups
Although this receiver incorporates a multi channel decoder, it is also equipped with multi channel
input jacks. These connections allow you to enjoy multi channel software encoded in formats other
than Dolby Digital and DTS. If your DVD player is equipped with multi channel output jacks, you
can connect them directly to the receiver to enjoy the sound of the DVD player’s multi channel
decoder. Alternatively, the multi channel input jacks can be used to connect an external multi channel
decoder.
To fully enjoy multi channel surround sound, five speakers (two front speakers, two surround
speakers, and a center speaker) and a sub woofer are required. For 6.1 channel surround sound
(STR-DB1070 only), you will also need a surround back speaker. Refer to the operating instructions
supplied with your DVD player, multi channel decoder, etc., for details on the multi channel
hookups.
Notes
When using the connections described below, adjust the level of the surround speakers and sub woofer from the
DVD player or multi channel decoder.
See page 17 for details on speaker system hookup.
(For STR-DB1070) When you set the center and surround back speakers to use as the surround back right and
left speakers in the speaker settings, the signal input at the MULTI CH IN CENTER jack is directly output from
the surround back right speaker and the signal input at the MULTI CH IN SURROUND BACK jack is directly
output from the surround back left speaker.
(For STR-DB870) When you set the center speaker to use as the surround back speaker in the speaker settings,
the signal input at the MULTI CH IN CENTER jack is directly output from the surround back speaker.
For details about the speaker settings, refer to “Multi channel surround setup” on page 19.
DVD player,
Multichannel decoder, etc.
* STR-DB1070 only.