Filter
Top Products
9
Recording manually
To
Stop recording
Pause recording
With manual recording, you can record just
the songs you like from a CD, or start
recording from the middle of the tape. You
can also record a radio programme or MD.
* This tape deck is equipped with the Dolby B-type
noise reduction system.
1 Press POWER on the DHC-MD313
to turn on the DHC-MD313
component system.
The tape deck turns on automatically.
2 Insert a blank tape.
1
3
TAPEP
TAPEp
The remote
supplied with
the DHC-MD313
With the side you want
to record on facing up
3 Press FUNCTION on the DHC-
MD313 until “CD,” “MD” or
“TUNER” appears.
4 Set DIRECTION to A to record on
one side. Set it to a to record on
both sides.
5 Press ®REC on the tape deck.
The tape deck stands by for recording.
The indicators on the ®REC, · (for the
top side) and ∏ buttons light up.
If you want to record starting from the
bottom side, press ª (for the bottom
side) so the indicator on the ª button
lights up.
6 Press ∏ on the tape deck.
Recording starts.
You can also start recording by pressing
the · or ª button that is lit.
7 Start playing on the source
component.
Tips
• The cassette indicator lights up in red when a
cassette is inserted and goes off when no cassette
is inserted.
• When you want to reduce the hiss noise in low-
level high-frequency signals, set DOLBY NR to
ON before step 5 .
• Using the timer function on the DHC-MD313, you
can record radio programmes at a preset time. For
details, refer to “Timer recording radio
programmes” in the DHC-MD313 component
system Instruction Manual. When you set the
timer recording, DOLBY NR and DIRECTION
mode must be set on the tape deck.
2
45
DOLBY NR* π
ª
6
Tape deck
TC-TX313
Cassette
indicator
·
Press
π (or TAPEp on the
remote)
∏ (or TAPEP on the
remote)