Filter
Top Products
6
Playing a tape
You can use any type of tape, TYPE I
(normal), TYPE II (CrO2) or TYPE IV (metal),
since the tape deck automatically detects the
tape type (ATS
1)
).
1)
ATS: Automatic Tape Selection.
1
TAPEP
With the side you want
to play facing up
FUNCTION
TAPEª/· TAPEp
TAPE0/)
2)
This tape deck is equipped with the Dolby B-type
noise reduction system.
1 Press POWER on the DHC-MD313
to turn on the DHC-MD313
component system.
The tape deck turns on automatically.
2 Insert a recorded tape.
3 Set DIRECTION to A to play one
side. Set it to a
3)
to play both
sides.
4 Press ·.
Press ª to play the bottom side.
FUNCTION switches to “TAPE”
automatically, then the tape starts
playing.
3)
The tape deck stops automatically after repeating
the sequence five times.
To play a tape using the DHC-
MD313 component system
Do the following operation in step 4;
1 Press FUNCTION until “TAPE” appears in
the display.
2 Press TAPE· on the remote.
To play the bottom side, press TAPEª on
the remote.
VOLUME
2
3
DOLBY NR
2)
Cassette
indicator
π
º/‚
ª
§∏
4
Tape deck
TC-TX313
The remote
supplied with
the DHC-MD313