Filter
Top Products
20
US
STR-DE985/DE885 4-238-488-12(1) US
45°
90°
20°
A A
B
CC
D
45°
90°
20°
A A
B
CC
D
Specifying the speaker
parameters
1 Press SET UP.
2 Press or to select the parameter
you want to adjust.
3 Turn the jog dial to select the setting
you want.
The setting is entered automatically.
4 Repeat steps 2 and 3 until you have set
all of the parameters that follow.
Initial settings
Parameter Initial setting
FRONT LARGE
CENTER LARGE
SURROUND LARGE
SURR BACK LARGE
1)
/NO
2)
SUB WOOFER YES
SURR POSI.
3)
SIDE
SURR HEIGHT
3)
LOW
SURR BACK HGT.
3)
LOW
FRONT XX.X feet
3)
16 feet
CENTER XX.X feet
3)
16 feet
SURROUND XX.X feet
3)
16 feet
SURR BACK XX.X feet
3)
16 feet
SUB WOOFER XX.X feet
3)
16 feet
DISTANCE UNIT
3)
feet
FRONT SP > XXX Hz
3)
STD (120 Hz)
CENTER SP > XXX Hz
3)
STD (120 Hz)
SURROUND SP > XXX Hz
3)
STD (120 Hz)
SURR BACK SP > XXX Hz
3)
STD (120 Hz)
LFE HIGH CUT > XXX Hz
3)
STD (120 Hz)
S.W PHASE
3)
NORMAL
1) STR-DE985 only
2) STR-DE885 only
3) You can set this parameter only when you set
“MENU EXPAND” to “ON” in the CUSTOMIZE
menu (page 44).
When placing surround speakers to your side
When placing surround speakers behind you
Tip
When you set up the surround back speaker, set the
speaker at least 1 meter behind the listening position.
It is recommended to place the speaker at an equal
distance from the surround left and right speakers. If
there is no space behind the listening position, set the
speaker above the listening position by placing it on a
stand or hanging it from the ceiling. To prevent
speaker damage or injury in case the speaker falls,
make sure that it is properly fixed in place.
Note
Do not place the center speaker farther away from the
listening position than the front speakers.
Multi channel surround setup
(continued)
01GB04SPKUS.p65 25/3/02, 02:46 PM20