Filter
Top Products
Other Operations
masterpage:Right
lename[C:\Data\Sony SEM_Janet\STR-
DE597_Data\J904000_4252271121DE597UCA\4252271121\4252271121DE597UCA\GB070T
H_STR-DE597-UCA.fm]
39
GB
model name1[STR-DE597]
[4-252-271-12(1)]
You can enter a name of up to 8 characters for
preset stations and inputs selected with input
buttons, and display it in the receiver’s display.
Use the buttons on the receiver for the operation.
1
To index a preset station
Press TUNER FM/AM repeatedly to
select the FM or AM band, then tune in
the preset station you want to create an
index name for (page 25).
To index an input
Press the input button to select the
input you want to create an index name
for.
2 Press MAIN MENU repeatedly to select
“ CUSTOM ”.
3 Press or repeatedly to select
“NAME IN”.
4 Press ENTER.
The cursor flashes and you can select a
character.
5 Use or and + or – to create an
index name.
Press + or – repeatedly to select a character,
then press > to move the cursor to the next
position.
Tips
• You can select the character type as follows by
pressing + or – repeatedly.
Alphabet (upper case) t Numbers t Symbols
• To enter a blank space, press + or – repeatedly
until a blank space appears in the display.
• If you made a mistake, press < or > repeatedly
until the character you want to change flashes,
then press + or – repeatedly to select the correct
character.
6
Press ENTER to store the index name.
Note (Models of area code CEL, CEK only)
When you name an RDS station and tune in the station,
the Program Service name appears instead of the name
you entered. (You cannot change the name of a
Program Service name. The name you entered will be
overwritten by the Program Service name.)
Other Operations
Naming preset stations
and inputs
GB01COV_STR-DE597-UCA.book Page 39 Monday, March 8, 2004 12:15 PM