Filter
Top Products
STR-DE185 (GB)4-238-304-51(1)
10
GB
To avoid short-circuiting the
speakers
Short-circuiting of the speakers may damage
the receiver. To prevent this, make sure to take
the following precautions when connecting the
speakers.
Make sure the stripped ends of each
speaker cord does not touch another
speaker terminal, the stripped end of
another speaker cord or the metal parts
of the receiver.
Examples of poor conditions of the
speaker cord
Stripped speaker cord is touching another
speaker terminal.
Stripped cords are touching each other
due to excessive removal of insulation.
Selecting the speaker system
To drive the speakers, select the speaker system
as follows. The SPEAKERS indicator(s)
light(s) up.
To drive Press SPEAKERS button
Speaker System A
(connected to the
SPEAKERS A
terminals)
Speaker System B
(connected to the
SPEAKERS B
terminals)
Both speaker
systems A and B
(parallel connection)
Tips
• Press SPEAKERS A or B button again to deselect
the speakers.
• The default speaker system is Speaker System A.
A
B
A and B