Filter
Top Products
73
Operations using the remote
Switching the COMMAND MODE
You can switch the command mode (AV
SYSTEM1 or AV SYSTEM2) of the remote. If
the command mode of the receiver and the
remote is different, you cannot use the remote
to operate the receiver.
1 Press SET UP.
The set up list appears.
AUTO POWER
BACK LIGHT
CONTRAST
pCOMMAND MODE
2 Move the easy scroll key to select
“COMMAND MODE”, then press the key
to enter the selection.
The COMMAND MODE list appears.
<COMMAND MODE>
pAV SYSTEM1
AV SYSTEM2
3RD ROOM
3 Move the easy scroll key to select “AV
SYSTEM1” or “AV SYSTEM2”, then
press the key to enter the selection.
Tip
When the remote is turned on, the COMMAND
MODE appears in the first line of the display.
Setting to the 3rd room mode
You can use the remote to select the function
for the 3rd room and adjust the volume in the
3rd room (3rd room mode).
1 Press SET UP.
The set up list appears.
AUTO POWER
BACK LIGHT
CONTRAST
pCOMMAND MODE
2 Move the easy scroll key to select
“COMMAND MODE”, then press the key
to enter the selection.
The COMMAND MODE list appears.
<COMMAND MODE>
AV SYSTEM1
AV SYSTEM2
p3RD ROOM
3 Move the easy scroll key to select “3RD
ROOM”, then press the key to enter the
selection.
The 3RD ROOM list appears.
<3RD ROOM>
pOK
SET UP
Cancel
4 Move the easy scroll key to select
“OK”, then press the key to enter the
selection.
continued