Filter
Top Products
Processor Operations
18
GB
Digital Recording
This processor makes it easy to make digital recordings
from the components connected to the processor. You
don’t have to connect playback and recording
components directly.
Before you begin, make sure you’ve connected all
components properly.
ç: Signal flow
EXAMPLE: Recording a CD using a DAT deck.
See your DAT or CD player’s instruction manual if you
need help.
1 Press DIGITAL 2 (if a CD player is connected to
the DIGITAL 2 INPUT) to select the CD player.
2 Insert a blank digital audio tape into the DAT for
recording.
3 Start recording on the DAT and then start playing
the CD you want to record.
Notes
• You cannot record the digital signal from a Dolby Digital
(AC-3) programme source.
• You cannot record the video signal from a connected
source component.
Playback component
(CD player, etc.)
ç
ç
Digital recording
component
(DAT deck, MD deck)