Filter
Top Products
Playing Discs
12
GB
Basic operations during play
To Press
Stop play x
Pause play X
Resume play after pausing X or N
Locate a succeeding track Turn lAMSL clockwise
Locate the beginning of the Turn lAMSL
current track or a preceding counterclockwise
track
Go to the next disc DISC SKIP
Select a disc directly DISC 1–5
Eject the disc A OPEN/CLOSE
z
You can select the disc you want to start playing first
Press one of the DISC 1–5 buttons.
z
To select a layer you want to listen to when playing a hybrid
disc (page 11)
After you stop play using x, press SACD/CD repeatedly to light
either the “SACD” or “CD”.
The selected layer is effective until you play another disc or turn
the player off. When you select another disc (even if you select
the same disc), the player selects an HD layer automatically
(default layer).
To select the CD layer automatically when you play a Hybrid
disc, change the default layer as follows:
1 Press MENU.
2 Turn lAMSL to select “LAYER SELECT.”
3 Push lAMSL.
The current default layer appears.
4 Turn lAMSL to select CD or SACD, then push
lAMSL again.
Note
During playback, increase the volume level gradually starting
from the lowest level. The output from this unit may contain
band width that are out of the normal listening range. This may
cause damage to the speakers or ears.
6 Press CONTINUE to select ALL DISCS or 1 DISC
Continuous Play mode.
Each time you press the CONTINUE button, “ALL
DISCS” or “1 DISC” appears in the display.
7 Press SACD/CD to select the SACD or CD.
Each time you press the button, the SACD or CD
appears alternately in the display. Select the type of
disc on the tray. For details, see page 10.
8 Press N.
Playback starts from the first track. If you want to start
playing from a specific track, turn lAMSL to
select the track number before pressing N.
9 Adjust the volume on the amplifier.
Playing a Disc
When you select
ALL DISCS
1 DISC
The player plays
All discs in the player consecutively in
the order of disc number
Only the disc you’ve selected