Filter
Top Products
18
US
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late at
night.
1 Press AMP MENU.
2 Press x/X repeatedly until
“CUSTOMIZE” appears, then press
ENTER or c.
3 Press x/X repeatedly until “AUDIO
DRC” appears, then press ENTER or c.
4 Press x/X to select the setting.
• DRC OFF : no compression of dynamic
range.
• DRC STD : reproduces the sound track
with the kind of dynamic range that the
recording engineer intended.
• DRC MAX : compresses dynamic range
fully.
5 Press ENTER or AMP MENU.
The AMP menu turns off.
• AUDIO DRC only applies to Dolby Digital sources.
You can select the sound you want when the
system receives a Dolby Digital multiplex
broadcast signal.
• To receive Dolby Digital signal, you need to connect
a digital satellite tuner to the system with an optical
cable or coaxial cable, and set the digital output mode
of the digital satellite tuner to Dolby Digital.
1 Press AMP MENU.
2 Press x/X repeatedly until
“CUSTOMIZE” appears, then press
ENTER or c.
3 Press x/X repeatedly until “DUAL
MONO”
appears, then press ENTER or
c.
4 Press x/X to select the sound you want.
• MAIN : plays back only the main channel.
• SUB : plays back only the sub channel.
• MAIN+SUB : mixed playback of the main
and sub channels.
• MAIN/SUB : main sound is output from
the left speaker and sub sound is output
from the right speaker.
Enjoying the sound at low
volume
(AUDIO DRC)
Note
H
X
Mm.
>
-
ENTERCLEAR
x
O
AMP MENU
X/x/c
ENTER
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
Note
H
X
Mm.
>
-
ENTERCLEAR
x
O
AMP MENU
X/x/c
ENTER