Filter
Top Products
10
US
If you connect a Sony TV, follow the steps below
to program the remote. The TV input will be
selected automatically (Input SYNC).
1 Press the input button for the
component you want to change while
holding down RM SETUP.
The indicator lights up.
• Press the RM SETUP button using a pointed
object.
2 See the table below for the remote
button corresponding to the TV input
jack you have connected to, and press
the button.
* TV input jack name may differ depending on
your TV model.
3 Press ENTER.
The indicator slowly flashes twice and the
remote automatically exits the
programming mode.
To disable this function
Press ENTER while holding down 0 in step 2.
The TV input will not be selected automatically
even if you press the input buttons.
Controlling the connected components
Programming the remote
for TV operation (Sony TV
only)
(Input SYNC)
Note
TV input jack* Remote Button
VIDEO 1 1
VIDEO 2 2
VIDEO 3 3
VIDEO 4 4
VIDEO 5 5
VIDEO 6 6
VIDEO 7 7
VIDEO 8 8
H
X
Mm.
>
-
ENTERCLEAR
x
RM SETUP
Input buttons
Numeric
buttons, etc.
ENTER
COMPONENT 1 9
COMPONENT 2 AUDIO
COMPONENT 3 SUBTITLE
COMPONENT 4 ANGLE
TV input jack* Remote Button