Filter
Top Products
34
Labeling recordings
You can name tracks during playback,
discs during stop, and both during
recording. Each name can be as long as
200 letters.
Each disc can hold up to 1700
alphanumeric letters during playback or
stop.
On the recorder
Labeling a disc during stop
1 Insert a disc.
2 Press the jog lever so that “EDIT”
flashes in the display, and then press
the lever again.
“ :Name” flashes in the display.
3 Press the jog lever.
The disc is ready to be labeled.
4 Flip the jog lever to select a letter and
press the lever to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
5 Repeat step 4 and enter all characters
of the label name.
To cancel labeling, press x or T
MARK
6 Press the jog lever for 2 seconds or
more
.
The track or disc is labeled.
./>
VOL +/–
T MARK
X
END SEARCH
x
Jog lever
Press To
X Switch between
capital letters, small
letters, marks /
numbers, and
phrases.
1)
1)
If phrases are stored in the phrase bank,
the first phrase stored appears in the
display(page 37).
VOL +/– Move the cursor to the
left or right.
./> Change the letter to
the one before / next
one.
END
SEARCH/
VOL +
Insert a blank space to
type in a new letter
pressing both buttons
together.
END
SEARCH/
VOL –
Delete a letter and
move back all
following letters to the
left pressing both
buttons together.
x Cancel labeling.
T MARK Cancel labeling.