Filter
Top Products
8
1 Press TUNER/BAND repeatedly to
select FM or AM.
2 Press and hold + or – (or TUNING
+/– on the remote) until the
frequency indication starts to
change, then release.
Scanning stops automatically when a
station is tuned in. “TUNED” and
“STEREO” (for a stereo program) appear
in the display.
3 Press TUNER MEMORY.
A preset number appears in the display.
The stations are stored from preset
number 1.
4 Press ENTER.
The station is stored.
5 Repeat steps 1 through 4 to store
other stations.
To tune in a station with a weak
signal
Press + or – (or TUNING +/– on the remote)
repeatedly in step 2 to tune in the station
manually.
To set another station to an
existing preset number
Start over from step 1. After step 3, turn the
shuttle until it clicks to select the preset
number where you want to store the other
station.
You can preset a station in the selected preset
number.
Preset number
Step 3: Presetting radio stations
(continued)
MONO
TUNED
STEREO
MHz
kHz
VOLUME
ALL DISCS
ß
VOLUME
ALL DISCS
ß