Sony MHC-BX2 Stereo System User Manual


 
12
3 Press Z OPEN/CLOSE and place a
CD.
Then press Z OPEN/CLOSE again to
close the disc tray.
When the CD you want to record is not
selected, press DISC SKIP EX-CHANGE
repeatedly to select the CD you want.
4 Press CD SYNC.
Deck B stands by to record in the
direction of the indicator on hH (the
right indicator lights to record on the
forward side and the left indicator lights
to record on the reverse side). The CD
player stands by for playback.
5 Press DIRECTION repeatedly to
select g to record on one side.
Select j (or RELAY) to record on
both sides.
6 Press REC PAUSE.
Recording starts.
To stop recording
Press x.
Tips
•If you want to record from the reverse side, press
TAPE A/B repeatedly to select deck B after step 1.
Press hH to start playback of the reverse side,
then press x where you want to start recording.
•When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
•You can use synchro record only when recording
a CD.
Note
You cannot listen to other sources while recording.
DISC SKIP
EX-CHANGE
hH
x
The CD SYNC button lets you record from a
CD to a tape easily. You can use a TYPE I
(normal) tape.
Recording a CD
— CD Synchro Recording
With the side
you want to
record facing
forward
3
5
1
64
Place with the
label side up.
When you play a
CD single (8 cm
CD), place it on
the inner circle of
the tray.
?/1
(Power)
1 Press A and insert a recordable tape
into deck B.
2 Press CD.
2