14
TUNED
STEREO
MHz
§
≠ +
–
+
0
g
)
≠ +
–
+
1
2
3
4
5
§
§ §
·
ª · π ª · π
∏
π
DOLBY NR
π
ª
–/+
3 Press § and insert a recordable tape
into deck B.
4 Press REC PAUSE/START.
Deck B stands by for recording.
5 Press DIRECTION repeatedly to
select A to record on one side.
Select ß (or RELAY) to record on
both sides.
6 Press REC PAUSE/START.
Recording starts.
To stop recording
Press π on deck B.
Tips
•If you want to record from the reverse side, press
ª so that ª (for reverse side) lights up.
•When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
•To record non-preset stations, use – and + to tune
in the desired station manually.
•When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” lights up after pressing REC
PAUSE/START in step 6.
•If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Note
Dolby NR is off and DIRECTION (A or RELAY) is
ß when the mains AC power supply is switched
off.
Recording from the
radio
With the side
you want to
record facing
forward
You can record the radio programme on a
tape by calling up a preset station. You can
use TYPE I (normal) or TYPE II (CrO
2
) tapes.
The recording level is automatically adjusted.
Turn counter-
clockwise for
lower preset
numbers.
1 Press TUNER BAND to select the
band you want.
2 Turn the jog dial to tune in a preset
station.
Turn clockwise
for higher
preset numbers.
Preset number
Frequency
1/u
(Power)
1
5
4,6
2
3