Filter
Top Products
8
1 Press DOLBY PRO LOGIC (or PRO
LOGIC on the remote).
“PRO LOGIC ON” appears.
2 Press T.TONE on the remote.
Each speaker emits the test tone in the
following order. Adjust the volume of
the test tone.
3 From your listening position, press
CENTER +/– and REAR +/– on the
remote to adjust the volume.
Adjust until the volume levels from each
speaker become the same.
4 Press T.TONE when you are done
adjusting.
The test tone turns off.
Tip
If you turn VOLUME (or press VOL +/– on the
remote) all the speaker volumes change.
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.
Step 2: Setting up your speakers
(continued)
Adjusting the speaker
volume
To enjoy Dolby Pro Logic Surround sound,
turn on the Dolby Pro Logic mode, then
adjust the volume of each speaker using the
test tone provided by the system.
1
1
3
2, 4
?/1
(Power)
t LEFT (front) t CENTER t RIGHT (front)
REAR
T