Filter
Top Products
40
Connecting external
antennas
Connect the external antenna to improve the
reception. Refer to the instructions of each
component.
FM antenna
Connect the optional FM external antenna.
You can also use the TV antenna instead.
Jack type A
Jack type B
IEC standard socket
connector
(not supplied)
75-ohm coaxial cable
(not supplied)
Connecting a DVD player
(continued)
When your DVD player has stereo
analog outputs
Be sure to match the color of the plugs and
the connectors. Connect the LINE OUT
(audio) output jack of your DVD player to the
FRONT jacks of DVD INPUT with the audio
connecting cable. To listen to the sound from
the connected DVD player, press DVD 5.1CH
to turn off the indicator on the button.
Notes
•Each time you press DVD 5.1CH, the function
changes as follows.
DVD 5.1CH y DVD (2 channel)
(indicator on) (indicator off)
•You cannot enjoy the 5.1 channel surround sound
if you connect a DVD player which does not have
the 5.1 channel analog outputs.
•If there is no sound when you connect a DVD
player which has 5.1 channel analog outputs,
connect the LINE OUT (audio) output jacks of
your DVD player to the MD IN jacks, then change
the function to “MD” by pressing MD (VIDEO).
If you cannot select “MD”, see page 38.
?/1
(Power)
DVD 5.1CH