Sony MHC-BX3 Stereo System User Manual


 
16
1 Press TAPE A/B.
To select deck A or B, press TAPE A/B
repeatedly.
2 Press A and insert a recorded tape
in deck A or B.
3 Press DIRECTION repeatedly to
select g to play one side. Select
j to play both sides.
To play both decks in succession, select
RELAY (Relay Play)*.
4 Press hH.
Press hH again to play the reverse
side. The tape starts playing.
With the side
you want to
play facing
forward
To Do this
Stop playback Press x.
Pause Press X. Press again to
resume playback.
Fast-forward
Turn the shuttle clockwise until
it clicks while playing the front
side or counterclockwise until
it clicks while playing the
reverse side (or press
J
or
j
on the remote).
Rewind
Turn the shuttle
counterclockwise until it
clicks while playing the front
side or clockwise until it
clicks while playing the
reverse side (or press
j
or
J
on the remote).
Remove the cassette Press A.
Adjust the volume Turn VOLUME (or press
VOL +/– on the remote).
Searching for the beginning of a
track (AMS*)
During playback, press . or >
repeatedly for the number of songs you want
to skip forward (or backward).
T
he search direction, + (forward) or – (back),
and number of songs being skipped (1~9)
appear in the display.
Example: searching forward 2 songs
* AMS (Automatic Music Sensor)
Tip
When no tapes are inserted, all the indicators light.
When a tape (tapes) is (are) inserted, corresponding
presence and forward/reverse indicators light.
Notes
•The deck stops automatically after repeating the
sequence five times.
•The AMS function may not operate correctly
under the following circumstances:
–When the unrecorded space between songs is
less than 4 seconds long.
–If completely different information is recorded
on the left and right channels.
–When there are continuous sections of extremely
low level or low frequency sound (like those of a
baritone sax).
When the unit is placed near a television. (In this case,
we recommend moving the unit farther away from the
television or turning off the television.)
Playing a tape (continued)
Forward
indicator
Reverse
indicator
Tape
presence
indicator
* Relay Play always follows the following sequence:
t Deck A (front side) t Deck A (reverse side)
Deck B (reverse side) T Deck B (front side) T