Filter
Top Products
12
1 Press A and insert a recordable tape
into deck B.
2 Press CD.
3 Press Z OPEN/CLOSE and place a
CD.
Then press Z OPEN/CLOSE again to
close the disc tray.
When the CD you want to record is not
selected, press DISC SKIP EX-CHANGE
repeatedly to select the CD you want.
4 Press CD SYNC HI-DUB.
Deck B stands by for recording and the
CD player stands by for playback. The
indicator on REC PAUSE/START
flashes.
5 Press DIRECTION repeatedly to
select g to record on one side.
Select j (or RELAY) to record on
both sides.
6 Press REC PAUSE/START.
Recording starts.
To stop recording
Press x.
Tips
•If you want to record from the reverse side, press
TAPE A/B repeatedly to select deck B after step 1.
Press hH to start playback of the reverse side,
then press x where you want to start recording.
The reverse indicator of deck B lights (see page
16).
•When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
Note
You cannot listen to other sources while recording.
hH
p
DISC SKIP
EX-CHANGE
The CD SYNC HI-DUB button lets you record
from a CD to a tape easily. You can use TYPE
I (normal) tape.
Recording a CD
— CD Synchro Recording
With the side
you want to
record facing
forward
3
5
164
Place with the label
side up. When you
play a CD single (8
cm CD), place it on
the inner circle of
the tray.
?/1
(Power)
2