Sony MDR DS4000 Headphones User Manual


 
Connection
13
GB
Connecting the Headphone System
Connecting the processor to digital
components
Use the supplied optical digital connecting cable to connect the optical digital output
jack*
1
on a DVD player, Digital Broadcasting Satellite Receiver or other digital
component*
2
to the DIGITAL IN jack (black) of the processor.
The connected AV components may require to be set up for optical digital output.
Read their operating instructions.
When connecting the processor to an AV amplifier, etc., connect the DIGITAL OUT
jack (Red) and external optical digital input jack using the optical digital connecting
cable (sold separately).
Notes
• The optical digital connecting cable is an extremely high-precision device and is sensitive to
jolts and external pressure. Therefore, be careful when inserting and removing the cable plug.
• The digital input for the processor does not support sampling frequencies of 96 kHz. Set the
digital output setting for the DVD player to 48 kHz when using this system. Noise may be
heard when a 96 kHz digital signal is input.
*
1
If the connected equipment supports PCM output only, all surround sound effects will be
processed by DOLBY PRO LOGIC II.
*
2
Connection to the optical digital output jack on your personal computer is not guaranteed to
work with this system.
DTS
•A DTS-compatible DVD player is required for playback of DVDs recorded in DTS audio. (For
more details, see the instruction manual of your DVD player.)
• When playing CDs recorded in DTS format, noise may occur when fast forwarding or
rewinding. This is not a malfunction.
• If the DTS digital output is set to “OFF” on the DVD player, no sound may be heard even if the
DTS output is selected in the DVD menu.
• No sound may be heard when a DVD player and this unit is analogue-connected. In this case,
use a digital connection.
1 Connection
(Continued)
To DIGITAL IN
jack (Black)
Processor
DVD player, Digital Broadcasting
Satellite Receiver or other digital
component having an optical
digital output jack
To optical digital
output jack
Optical digital connecting
cable (supplied)
Match the orientation of
the plug with the jack, and
then insert until the plug
fits into place.
Optical digital connecting
cable (sold separately)
To DIGITAL OUT
jack (Red)
Equipment with optical
digital input terminal such
as an AV amplifier
To optical digital
input jack