Filter
Top Products
masterpage:Left
lename[C:\Documents and
S
ettings\pc13\Desktop\J9031708_4252085411HT5800DPUS\4252085411\GB09ADD_HT-
800DP-US.fm]
42
US
model name1[HT-5800DP]
model name2[HT-4850DP]
model name3[HT-4800DP]
[4
-
252
-
085
-
41
(1)]
If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver’s memory may remedy the
problem (page 14). However, note that all
memorized settings will be reset to their factory
settings and you will have to readjust all settings
on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing
the receiver’s memory
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(Models of area code U only)
With 6 ohm loads, both channels driven, from
120 – 20,000 Hz; rated 80 watts (STR-K5800P)/
60 watts (STR-K4800P) per channel minimum
RMS power, with no more than 0.7% total
harmonic distortion from 250 milliwatts to rated
output.
Amplifier section
Power Output
1)
Models of area code U
(6 ohms 1 kHz, THD 10%)
STR-K5800P: FRONT
2)
: 120 W/ch
CENTER
2)
: 120 W
SURR
2)
: 120 W/ch
STR-K4800P: FRONT
2)
: 100 W/ch
CENTER
2)
: 100 W
SURR
2)
: 100 W/ch
Models of area code CA
(6 ohms 1 kHz, THD 0.7%)
STR-K4800P: FRONT
2)
: 80 W/ch
CENTER
2)
: 80 W
SURR
2)
: 80 W/ch
(6 ohms 1 kHz, THD 10%)
STR-K4800P: FRONT
2)
: 100 W/ch
CENTER
2)
: 100 W
SURR
2)
: 100 W/ch
1) Measured under the following conditions:
2) Depending on the sound field settings and the
source, there may be no sound output.
Inputs (Analog)
Inputs (Digital)
To clear See
All memorized settings page 14
Customized sound fields page 27
Specifications
Area code Power requirements
U, CA 120 V AC, 60 Hz
CD, MD/TAPE,
VIDEO 1, 2, DVD
Sensitivity: 800 mV
Impedance: 50 kiloohms
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
VIDEO 2 (Optical) Sensitivity: –
Impedance: –
GB01COV_HT-5800DP-US.book Page 42 Wednesday, March 17, 2004 5:48 PM