Filter
Top Products
46
Radio reception
Cause/Solution
•Store the correct frequency in the memory.
•The broadcast signal is too weak.
Connect a power antenna control lead (blue) or accessory
power supply lead (red) to the power supply lead of a car’s
antenna booster. (Only when your car has built-in FM/AM
antenna in the rear/side glass.)
The broadcast signal is too weak.
t Use manual tuning.
•Tune in the frequency accurately.
•The broadcast signal is too weak.
t Set to the monaural reception mode (page 30).
The unit is in monaural reception mode.
t Cancel monaural reception mode (page 30).
The Wide mode is selected.
t Set the IF mode to “IF Auto” (page 30).
Timer-off recording is activated.
t Stop recording.
Problem
Preset tuning is not possible.
The stations cannot be received.
The sound is hampered by
noises.
Automatic tuning is not
possible.
The “ST” indication flashes.
A program broadcast in stereo
is heard in monaural.
Interference occurs during FM
reception.
The power antenna remains
extended even when you turn
off the ignition.