Filter
Top Products
31
5 Press (ENTER).
Tips
• To erase or correct a name, enter “
” for each
character.
• There is another way to start storing station
names: Press (LIST) for 2 seconds instead of
performing steps 2 and 3. You can also complete
the operation by pressing (LIST) for 2 seconds
instead of performing step 5.
Erasing a station name
1 During radio reception, press (MENU),
then press either side of (DISC/PRST)
repeatedly until “Name Del” appears.
2 Press (ENTER).
3 Press either side of (DISC/PRST)
repeatedly to select the station whose
name you want to erase.
4 Press (ENTER) for 2 seconds.
The name is erased.
Repeat steps 3 to 4 if you want to erase
other names.
5 Press (MENU) twice.
The unit returns to normal radio reception
mode.
Note
If you have already erased all of the station names,
“NO Data” appears in step 4.
Storing station names
— Station Memo
You can assign a name to each radio station
and store it in memory. The name of the
station currently tuned in appears on the
display. You can assign a name using up to 8
characters for a station.
Storing the station names
1 Tune in a station whose name you want
to store.
2 Press (MENU), then press either side of
(DISC/PRST) repeatedly until “Name
Edit” appears.
3 Press (ENTER).
4 Enter the characters.
1 Press the (+) side of (DISC/PRST)
repeatedly to select the desired
characters.
(A t B t C t ··· Z t 0 t 1 t 2 t
··· 9 t + t – t * t / t \ t > t <
t . t )
If you press the (–) side of (DISC/PRST)
repeatedly, the characters appear in
reverse order.
If you want to put a blank space
between 2 characters, select “ .”
2 Press the (+) side of (SEEK/AMS) after
locating the desired character.
If you press the (–) side of (SEEK/AMS),
you can move back to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
Station name
Frequency