Filter
Top Products
56
GB
You can control your TV (SONY only) with the
supplied remote.
Controlling TVs with the
remote
To control the TV
You can control the TV by using following
buttons.
- is for selecting a channel number greater than
10. (For example, for channel 25, press -, then
2 and 5.)
Note
• Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
THEATRE SYNC allows you to turn on your
SONY TV and this system, changes the system
mode to “DVD,” and then switches the TV’s
input source you set with one button push.
Preparing for the THEATRE
SYNC function
Register the TV’s input source connected to this
system.
Press and hold TV/VIDEO while entering
the code for the TV’s input source
connected to this system (see the table)
using the number buttons.
The TV’s input source is selected.
Set your TV’s input to the input you used to
connect the system. For details, see the
instructions of your TV.
* Except for North American models.
Other Operations
Controlling the TV with the
Supplied Remote
By pressing You can
TV [/1 Turn the TV on or off.
TV/VIDEO Switch the TV’s input source
between the TV and other input
sources.
TV VOL +/– Adjust the TV volume.
TV CH +/– Select the TV channel.
Number buttons
while pressing
the TV button
Select the TV channel.
Using the THEATRE SYNC
Function
By pressing Number TV’s input source
TV/VIDEO 0 No input source
(Default)
1VIDEO1
2VIDEO2
3VIDEO3
4VIDEO4
5VIDEO5
6VIDEO6
7VIDEO7
8VIDEO8
9* COMPONENT 1
CLEAR* COMPONENT 2
AMP
MENU*
COMPONENT 3
PICTURE
NAVI*
COMPONENT 4