Filter
Top Products
53
GB
Sound Adjustments
Using only the front
speakers (2CH STEREO)
Press SOUND FIELD repeatedly until
“2CH STEREO” appears on the front
panel display.
This mode outputs the sound from the front
left and right speakers only. Standard 2
channel (stereo) sources completely bypass
the sound field processing. Multi channel
surround formats are downmixed to 2
channel.
Note
No sound is output from the sub woofer when 2 CH
STEREO is selected. To listen to 2 channel (stereo)
sources using the front left and right speakers and a
sub woofer, press SOUND FIELD repeatedly to
select A.F.D..
123
456
7
>
10
10/0
89
SOUND
FIELD
Adjusting the level
parameters
The level menu contains parameters that let
you adjust the balance and speaker volumes
of each speaker (page 28).
1 Start playing a program source
encoded with multichannel
surround sound.
2 Press AMP MENU repeatedly on
the remote.
9 LEVEL appears on the front panel
display.
3 Sit in your listening position and
select the item to be adjusted
using X/x.
4 Adjust the volume level using C/c.
The adjusted value will appear on the
front panel display. If you do not operate
the remote for a few seconds, the value
turns off and is stored in the system.
AMP
MENU
X/x/C/c