Sony CMT-NE3 Stereo System User Manual


 
masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-NE5-
NE3\DTP\4253397111\425339711CMTNE5UC2\GB09TIM-CEL.fm]
18
GB
model name[CMT-NE5/CMT-NE3]
[4-253-397-11(2)]
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 8).
Use buttons on the remote for the operation.
1 Prepare the sound source you want to
play.
CD: Load a disc. To start from a specific
track, make a program (see “Creating
your own program” on page 11).
TAPE: Load a tape (see “Playing a tape”
on page 15).
TUNER: Tune in a radio station (see
“Listening to the radio” on page 13).
2 Adjust the volume.
3 Press CLOCK/TIMER SET.
4 Press ./> repeatedly until
“PLAY” appears, then press ENTER.
“ON TIME” appears and the hour
indication flashes.
5 Set the time to start playing.
Press ./> repeatedly to set the hour,
then press ENTER.
The minute indication flashes.
Press
./> repeatedly to set the
minute, then press ENTER.
6 Set the time to stop playing following
the same procedure as step 5.
7 Press ./> repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
8 Press ENTER.
The start time, the stop time and the sound
source, then the original display returns.
9 Press ?/1 to turn off the system.
Other operations
Notes
If you use Play Timer and Sleep Timer at the same
time, Sleep Timer has priority.
Do not operate the system from the time the system
turns on until the play starts (about 15 seconds before
the preset time).
If the system is on about 15 seconds before the preset
time, Play Timer will not be activated.
You cannot use the optional component connected to
the MD jacks as sound sources for Play Timer.
You cannot activate Play Timer and Rec Timer at the
same time.
Waking up to music
—Play Timer
t
TUNER
y
CD
T
t
TAPE
T
To Do this
Cancel the timer/
activate the timer/
check the setting
1 Press CLOCK/TIMER
SELECT and “SELECT”
appears.
2 Press ./> repeatedly
until “PLAY”, “REC” or
“(TIMER) OFF” appears,
then press ENTER.
Change the setting Start over from step 1.