Filter
Top Products
Disc – Play
19
GB
You can make a program of up to 12 steps.
You can synchro record the programmed tracks
onto a cassette tape (page 32).
The program operation can only be set using the
TV screen.
1 Press DVD (or FUNCTION + or –
repeatedly) to switch the function to
DVD.
2 Press PLAY MODE repeatedly in stop
mode until the Program Display
appears on the TV screen.
3 Press M/m/</, repeatedly to select
the desired step number.
4 Press the number buttons to select the
track you want to program.
If you make a mistake, press CLEAR to
cancel the number, then select another
number.
5 To program other tracks, repeat steps 3
and 4.
6 Press M/m/</, repeatedly to select
“Play Program,” then press H (or DVD
NX on the unit).
Program Play starts.
Other operations
Notes
• You cannot perform Program Play with DVDs and
VIDEO CDs with PBC function.
• Program Play is canceled when:
– you turn off the system.
– you open the disc tray.
– you switch to other functions except DVD.
Tip
The program you made remains after Program Play
finishes. To play the same program again, press H (or
DVD NX on the unit).
Creating your own
program
— Program Play
7
8
9
10
11
12
Track
All ClearPlay Program
Program
1
2
3
4
5
6
7
8
9
10
11
12
Track
All ClearPlay Program
Program
1 3
2
3
4
5
6
To Do this
Cancel Program Play Press PLAY MODE
repeatedly in stop mode
until “Continue” appears.
Clear a programmed
step
Press M/m/</,
repeatedly to select a step
number, then press CLEAR
in stop mode.
Clear all the
programmed steps
Press M/m/</,
repeatedly to select “All
Clear,” then press ENTER.