Filter
Top Products
10
GB
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Use buttons on the remote for the operation.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 8).
1
Press TUNER BAND repeatedly to
select FM or AM.
2
Press TUNING MODE repeatedly until
the preset number appears in the
display.
3
Press TUNING +/– repeatedly to select
the desired preset station.
Listening to non-preset radio
station
— Manual Tuning
1
Press TUNER BAND repeatedly to
select FM or AM.
2
Press TUNING MODE repeatedly until
“AUTO” and the preset number
disappear from the display.
3
Press TUNING +/– repeatedly to tune in
the desired station.
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
• When an FM stereo program has static noise, press
FM MODE until “MONO” appears. There will be no
stereo effect, but the reception will improve.
• In step 2, press TUNING MODE repeatedly until
“AUTO” and the frequency appear in the display,
then press TUNING +/–. The frequency indication
changes and scanning stops when the system tunes in
a station (Automatic Tuning).
You can adjust the bass and treble to enjoy more
powerful sound.
Use buttons on the remote for the operation.
Generating a more dynamic
sound (Dynamic Sound
Generator)
Press DSG.
To cancel the DSG, press DSG again.
Adjusting the bass and treble
1
Press BASS to adjust the bass, or
TREBLE to adjust the treble.
2
Press EQ +/– repeatedly to adjust the
level.
Tip
To cancel the bass or treble adjustment, press
CENTER in step 2.
Adjusting the balance
You can adjust the left-right speaker balance.
1
Press BALANCE.
2
Press EQ +/– repeatedly to adjust the
balance.
Tip
To cancel the balance adjustment, press CENTER in
step 2.
Listening to the radio
Sound Adjustment
Adjusting the sound