Filter
Top Products
Playing CDs
8
EN
Locating a Specific Track or a
Particular Point in a Track
You can quickly locate any track while playing a disc
using the AMS (Automatic Music Sensor) on the player
or number buttons on the remote.
You can also locate a particular point in a track while
playing a disc.
When you directly locate a track numbered over 10
when using the remote (except for CDP-XE200)
Press >10 first, then the corresponding number buttons.
To enter “0,” use button 10.
Example: To play track number 30
Press >10 first, then 3 and 10.
You can extend the playing time during Music Scan
Press MUSIC SCAN repeatedly until the playing time
you want (10, 20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Note
If “ ” appears in the display, the disc has reached the end
while you were pressing ). Press 0 or turn ≠ AMS ±
counterclockwise to go back.
Playing Tracks Repeatedly
You can play tracks repeatedly in any play mode.
• CDP-XE500
REPEAT
• CDP-XE300 and CDP-XE200
·
0 / )
≠ A M S ±
Number
buttons
>10
= / +
0 / )
To locate
The next or
succeeding tracks
The current or
preceding tracks
A specific track
directly
By scanning each
track for 10 seconds
(Music Scan) (CDP-
XE500 only)
A point while
monitoring the sound
A point quickly by
observing the display
during pause
You need to
Turn ≠ AMS ± clockwise until
you find the track. When using the
remote, press + repeatedly until
you find the track.
Turn ≠ AMS ± counterclockwise
until you find the track. When using
the remote, press = repeatedly until
you find the track.
Turn ≠ AMS ± until you find the
track number you want appears in the
display. When using the remote, press
number button of the track (except for
CDP-XE200).
Press MUSIC SCAN. When you find
the track you want, press · to start
playing the track.
) (forward) or 0 (backward) and
hold down until you find the point
) (forward) or 0 (backward) and
hold down until you find the point.
You will not hear the sound during the
operation.
REPEAT
Press REPEAT while playing a disc.
“REPEAT” appears in the display. The player repeats
the tracks as follows:
When the disc is played in
Continuous Play (page 6)
Shuffle Play (page 9)
Program Play (page 9)
To cancel Repeat Play
Press REPEAT repeatedly until “REPEAT” disappears from
the display.
The player repeats
All the tracks
All the tracks in random
orders
The same program
MUSIC SCAN
(CDP-XE500 only)
(except for
CDP-XE200)