Filter
Top Products
Playing CDs
9
Playing the CD
––Normal Play/Shuffle Play/Repeat
Play
This unit lets you play the CD in different play
modes.
1 Press PLAY MODE repeatedly until the
mode you want appears.
2 Press H.
Tip (CDP-XE570/XE370 only)
You can select the playing mode by pressing
CONTINUE, SHUFFLE, or PROGRAM on the
remote.
Repeat Play Operations
You can play the CD tracks repeatedly in any
play modes.
To activate the Repeat Play function, press
REPEAT until “REPEAT’ appears in the
display.
To
Repeat only one track
Cancel Repeat Play
When you are in the Repeat Play function, the
player repeats the tracks as follows:
When the disc is
played in
Continuous Play
Shuffle Play
Programme Play
(page 12)
Select
CONTINUE
SHUFFLE
PROGRAM
To play
The CD in the original order.
The tracks on the CD in random
order.
The tracks on the CD in the
order you want them to be
played (see “Programming the
CD tracks” on page 12).
Press REPEAT
Until “REPEAT 1” appears
while playing the track you
want to repeat.
Until “REPEAT” or
“REPEAT1” disappears.
The player repeats
All the tracks
All the tracks in random
order
The same programme
Getting Started
Other Operations
To
Stop playback
Pause
Select a track
Select a track directly
Find a point in a track
Play tracks in random
order
Remove the CD
Adjust the volume
* When you directly locate a track numbered over 10,
press >10 first, then the corresponding number
buttons. To enter “0,” use button 10.
Example: To play track number 30
Press >10 first, then 3 and 10.
Tips
• You can adjust the analog output level with the
ANALOG OUT LEVEL +/– on the remote (page 7)
(CDP-XE570/XE370 only).
• You can adjust the headphones volume on the
remote. To adjust the volume, connect the
headphones to the PHONES jack and adjust the
volume with the ANALOG OUT LEVEL +/– on
the remote (CDP-XE570 only).
• If there is no CD in the player, “–NO DISC–” (or
“no dISC” for the CDP-XE370/XE270) appears in
the display.
Note
If “– OVER –” (or “ ” for the CDP-XE370/
XE270) appears in the display, the disc has reached
the end while you were pressing M. Press m or
turn lAMSL counterclockwise to go back.
Do this
Press x.
Press X. Press X again or
H to resume play.
During play or pause, turn
lAMSL clockwise
(to go forward) or
counterclockwise (to go
backward)
(or press >( to go
forward) or . (to go
backward) on the remote
(CDP-XE570/XE370
only)).
Press the number button on
the remote.*
Press and hold M or m
during playback, and
release at the desired point.
Press PLAY MODE until
“SHUFFLE” appears in the
display.
Press AOPEN/CLOSE.
Press ANALOG OUT
LEVEL +/– on the remote.