Filter
Top Products
Getting Started
6
What cords will I need?
• Audio cord (1) (Use the cord supplied with the player to be
connected.)
• Monaural (2P) mini-plug cord (1) (not supplied)
1 Connect the players with an audio cord (see also
“Hookups” on page 5).
2 Connect the players with a monaural (2P) mini-
plug cord.
Connecting Another CD Player
If you have a Sony CD player in which 5, 50, 200, 300,
or 400 discs can be inserted and which is equipped
with the CONTROL A1
(or CONTROL A1) jack and
the command mode of that player can be set to CD 3,
you can control that player as the second player with
this player. After connecting this player and an
amplifier, follow the procedure below.
Be sure to turn off the power of each player before
making this connection.
CDP-CX400, etc.
CDP-CE545
To 2ND CD IN
CDP-CX400, etc.
To an AC outlet
To an AC outlet: Signal flow
To audio input
To audio output
To ANALOG OUT
Amplifier
CDP-CE545
CDP-CX400, etc.CDP-CE545
For details on this connection, refer to the
supplementary “CONTROL A1
Control System”
instructions.
3 Set the command mode of this player to CD1
(factory setting) or CD2, and set that of the second
player to CD3.
Check the display for the current command mode
of this player, if the mode is CD3, you have to
change the mode as descreibed on the next page.
When the setting of both players is complete, set
the CD1/2/3 switches on each remote accordingly.
For details on how to operate the second player,
see “Controlling Another CD Player” on page 18
and “Playing Alternately” on page 20.
To an AC outlet
To
CONTROL A1
ANALOG
IN OUT
L
R
ANALOG
OUT
L
R
2ND
CD
CONTROL
A1
CONTROL A1
Current command mode
12345
678910
12345
DISCSALL
DISC
CD1
*DISC-1*