Sony CDP-CE525 Stereo System User Manual


 
Playing CDs
16
3 Turn AMS ± until the track number you
want appears in the display.
The track number being programmed flashes and
the total playing time including the track appears
in the display.
4 Push AMS ± to select the track.
If you’ve made a mistake
Press CLEAR, then repeat Steps 3 and 4.
5 To program other discs or tracks, do the following:
To program
All tracks on other discs
Other tracks on the same disc
Other tracks on other discs
6 Press · to start Program Play.
To cancel Program Play
Press CONTINUE.
You can create your program while checking the disc
labels
While the disc tray is open, follow Steps 1 to 6 with
pressing the DISC SKIP button to check the disc labels. If
you close the disc tray before Step 6, the total playing
time appears in the display after a while.
Note that, if the programmed track number isn’t found
on the disc, that step is automatically erased.
Total playing time
Track number
being programmed
Last programmed
track
Playing order
After one second
Total playing time
Programmed tracks
Repeat Step(s)
2
3 and 4
2 through 4
A
25
8
1 2 3 4 5
DISC TRACK
MIN SEC
CD1
1 5 13.18
PROGRAM
A
25
8
1 2 3 4 5
DISC TRACK STEP
CD1
1 5 3
PROGRAM
A
25
8
1 2 3 4 5
DISC TRACK
MIN SEC
CD1
1 5 13.18
PROGRAM
Creating Your Own Program
(Program Play)
You can arrange the order of the tracks on the discs
and create your own program. The program can
contain up to 32 “steps” — one “step” may contain a
track or a whole disc.
Creating a program on the player
1 Press PROGRAM.
“PROGRAM” appears in the display.
If a program is already stored, the last step of the
program appears in the display. When you want to
erase the whole program, hold down CLEAR until
“CLEAR” appears in the display (see page 18).
2 Press DISC 1 – 5 to select the disc.
PROGRAM
“AL” in the display stands for “all” tracks.
When you want to program the whole disc as one
step, skip Steps 3 to 4, and go to Step 5.
A
12345
678910
1 2 3 4 5
DISC TRACK
MIN SEC
CD1
1 AL 45.28
PROGRAM
·
DISC 1 – 5
CLEAR
CHECK
PROGRAM
CLEAR
CHECK
=/+
·
AMS ±
DISC
Number
buttons
>10
ENTER