Filter
Top Products
model name [SHAKE-5]
[4-462-816-12(1)] GB
25
GB
filename[D:\NORM'S JOB\SONY HA\SO130030\SHAKE-5 (PMRF
02)\4462816121_GB\06BAS.fm]
masterpage:Right
Sound Adjustment
Creating your own
sound effect
You can raise or lower the levels of
specific frequency bands and then store
the setting in the memory as “USER EQ”.
1 Press OPTIONS on the unit.
2 Press / repeatedly to select
“EQ EDIT”, then press .
3 Press / repeatedly to adjust
the equalizer level, then press
.
4 Repeat step 3 to adjust the level
of other frequency bands and
surround effect.
The user equalizer setting is stored
when “USER EQ” appears in the
display panel.
To bring up the user equalizer
setting
Press MUSIC repeatedly to select “USER
EQ”.
Creating a party
atmosphere
(DJ EFFECT)
1 Press the following button to
select the effect type.
The selected button lights up and the
effect is activated.
• FLANGER: Create a deep flanging
effect that is similar to the roar of a
jet plane.
• ISOLATOR: Isolate a specific
frequency band by adjusting the
other frequency bands. For example,
when you want to focus on vocal and
etc.
• SOUND FLASH: Flash the sound
output. The sound cuts off
periodically.
• PHASER: Create a series of peaks
and troughs in the frequency
spectrum, like a sweeping effect.
2 Press DJ CONTROL +/– to adjust
the effect level.
To turn off the effect
Press the selected effect button again.
Notes
• The DJ EFFECT is automatically turned off
when you turn off the system or change the
function or tuner band.
• If you activate the DJ EFFECT during
transfer, the sound effect will not be
transferred onto the USB device.
• You cannot use VOLUME/DJ CONTROL
on the unit to adjust the volume when the DJ
EFFECT is activated. Press VOLUME +/– on
the remote control to adjust the volume.
Frequency band
Equalizer level