Filter
Top Products
5
GB
Getting Started
Hooking Up the Audio Components
COAXIAL
L
R
OPTICAL
DIGITAL OUT
CD
ANALOG OUT
R
L
CD
INPUT
Stereo amplifier, etc.
Connecting via DIGITAL OUT CD COAXIAL
connector
Use a coaxial digital cable to connect the audio components
equipped with coaxial digital input connectors.
Coaxial digital cable (not supplied)
Note
Only the audio signals of conventional CDs can be output from
the DIGITAL OUT CD connectors. Those of the Super Audio CD
cannot be output through DIGITAL OUT CD.
Connecting the AC power cord
Connect the AC power cordto a wall outlet.
White (L)
Red (R)
White (L)
Red (R)
Connect the Super Audio CD player to an audio
component. Be sure to turn off the power of all
components before making connections and connect
securely to prevent noise.
Connecting via ANALOG OUT jacks
Use an audio connecting cord for this connection. Be sure to
match the colour-coded pin to the appropriate jacks: white (left)
to white and red (right) to red.
Audio connecting cord (supplied)
Connecting via DIGITAL OUT CD OPTICAL
connector
Use an optical digital cable for this connection. When connecting
the optical digital cable to the DIGITAL OUT CD OPTICAL
connector, take the cap off the connectors and push the cable
plugs in until they click into place.
Be careful not to bend or twist the optical cable.
Optical digital cable (not supplied)
Note
Only the audio signals of conventional CDs can be output from
the DIGITAL OUT CD connectors. Those of the Super Audio CD
cannot be output through DIGITAL OUT CD.