Sony SCD-XA1200ES CD Player User Manual


 
8
GB
Connecting a digital
component (COAXIAL)
When you connect an MD deck or another
digital component through the DIGITAL (CD)
OUT COAXIAL connector, you can make a
digital recording.
Use a coaxial digital cable for this connection.
Be careful not to bend or twist the coaxial cable.
Coaxial digital cable (not supplied)
Connecting a digital
component (OPTICAL)
When you connect an MD deck or another
digital component through the DIGITAL (CD)
OUT OPTICAL connector, you can make a
digital recording.
Use an optical digital cable for this connection.
When connecting the optical digital cable to the
DIGITAL (CD) OUT OPTICAL connector,
push the cable plug in until it clicks into place.
Be careful not to bend or twist the optical cable.
Optical digital cable (not supplied)
Note
Only the audio signals of conventional CDs can be
output from the DIGITAL (CD) OUT connectors.
Those of the Super Audio CD cannot be output through
the DIGITAL (CD) OUT connectors.
DIGITAL(CD)ANALOG
5.1CH OUT2CH OUT
OUT
SURROND
L
L
R
R
FRONT CENTER
COAXIAL OPTICAL
SUB
WOOFER
To CD coaxial digital input connector
on an MD deck, etc.
DIGITAL(CD)ANALOG
5.1CH OUT2CH OUT
OUT
SURROND
L
L
R
R
FRONT CENTER
COAXIAL OPTICAL
SUB
WOOFER
To CD optical digital input connector
on an MD deck, etc.