Sony SCD-XA333ES CD Player User Manual


 
29
GB
Additional Information
Index
A
Accessories 4
Amplifier (not supplied) 5
AMS (Automatic Music Sensor) 14
ANALOG OUT
2CH 6
5.1CH 5
Area 13
B
Batteries 4
C
Cable
Coaxial digital 7
Optical digital 7
Cord
Audio connecting 5
D, E, F, G
DIGITAL (CD) OUT 7
Digital filter 22
Displaying information 15
H, I, J, K
Hooking Up
Audio Components 5
Power 7
L
Layer 12
Locating
a specific track 18
a particular point 18
by entering the track number 18
by observing the time indication (High-speed Search)
18
using the index function (Index Search) 18
while monitoring the sound (Search) 18
M, N
Multi-channel management function 23
Multi-channel Super Audio CD 13
SCD-XA333ES
When a super audio CD is played
Playing frequency range 2 Hz to 100 kHz
Frequency response 2 Hz to 50 kHz (–3 dB)
Dynamic range 106 dB or more
Total harmonic distortion rate
0.0015 % or less
Wow and flutter Value of measurable limit (±0.001 %
W. PEAK) or less
When a CD is played
Frequency response 2 Hz to 20 kHz
Dynamic range 100 dB or more
Total harmonic distortion rate
0.0018 % or less
Wow and flutter Value of measurable limit (±0.001 %
W. PEAK) or less
Output connector
*Output only the audio signals of the CD
General
Laser Semiconductor laser
(SACD: λ = 650 nm)
(CD: λ = 780 nm)
Emission duration: continuous
Laser radiant power: 5.47 uW at 650 nm
*These output is the value measured at a distance of about
200mm from the objective lens surface on the optical pick-up.
Power requirements 230 V AC, 50/60 Hz
Power consumption 27 W
Dimensions (w/h/d) 430 × 130 × 380 mm
incl. projecting parts
Mass (approx.) 9.5 kg
Supplied accessories
See page 4.
Design and specifications are subject to change without
notice.
ANALOG OUT
DIGITAL (CD)
OUT
OPTICAL*
DIGITAL (CD)
OUT
COAXIAL*
PHONES
Jack type
Phono
jacks
Square
optical
output
connector
Coaxial
output
connector
Stereo
phone jack
Output level
2 Vrms
(at 50 kilohms)
–18 dBm
0.5 Vp-p
10 mW
Load impedance
Over 10 kilohms
Light emitting
wave length:
660 nm
75 ohms
32 ohms
( )