Filter
Top Products
19
GB
Network Connections
3 Check whether your computer
and router are turned on.
4 Turn the unit on.
5 Click [My Network] or [Network]
t [SA-NS300].
The [Sony Network Device Setting]
screen appears.
Notes
• Install the UPnP service in advance if you are
using Windows XP (page 28).
•Check your set-up of the firewall of the
security software if you cannot find
[SA-NS300] or the browser does not open
even if you double-click [SA-NS300] on
screen of your computer.
•Restart your computer if you cannot find
[SA-NS300].
6 Select the desired language
when the “Language Setup”
screen appears.
7 Select [Network Settings] from
the menu.
8 Remove the checkmark in the
check box beside [Automatic
Setup], then input the required
information for each item.
• IP address (IP address of the unit)
• Subnet Mask (Subnet Mask)
• Default Gateway (Default Gateway)
• PrimaryDNS (IP address of the primary
DNS)
• SecondaryDNS (IP address of the
Secondary DNS)
9 Click [Apply].
10Click [OK] when the
confirmation screen of the
pop-up window appears.
The unit restarts automatically, then the
LINK indicator lights up in amber when
the connection is made.
Note
Set the DHCP setting of your computer and
router to OFF again.
Apply