Filter
Top Products
17
GB
Troubleshooting/Specifications
The STANDBY indicator flashes.
• Turn off the unit and unplug the AC power
cord (mains lead) immediately.
• Remove anything that is blocking the
ventilation hole.
If the unit still does not operate
properly after performing the
above measures, reset the unit
as follows:
Use the button on the unit for the operation.
1 Press ?/1 to turn on the unit.
2 Hold down ?/1 for 5 seconds.
STANDBY indicator flashes 3 times and
the unit is reset to the default settings.
Specifications
Amplifier section
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(FTC)
(USA model only)
L + R With 8 ohm loads, both
channels driven, from 300
– 20,000 Hz; rated 14 watts
per channel minimum
RMS power, with no more
than 1% total harmonic
distortion from 250
milliwatts to rated output.
POWER OUTPUT (reference)
L / R 20 W (per channel at
8 ohms, 1 kHz)
(China model only)
POWER OUTPUT (rated)
(Measured under MOVIE sound field)
L + R 9.5 W + 9.5 W
(at 8 ohms, 1 kHz,
1% THD)
(Other models)
POWER OUTPUT (rated)
L + R 16 W + 16 W
(at 8 ohms, 1 kHz,
1% THD)
POWER OUTPUT (reference)
L / R 20 W (per channel at
8 ohms, 1 kHz, 10% THD)
OTHER
continued