Filter
Top Products
13
GB
Listening to TV sound from the speaker of the unit
Listening to TV sound from the speaker of the unit
1
Turn on the unit or make sure
the unit is in standby mode.
2 Turn on the TV.
While the unit is in the standby mode, the
unit turns on automatically when a sound
of a TV is detected.
3 Adjust the volume of the unit.
Note
When the sound output level of your TV cannot be
changed, adjust the volume of the unit.
If the sound output jack of the TV can be set to
“Variable”, the volume of the unit can be
changed by adjusting the TV volume.
For TV settings, refer to the operating
instructions of the TV.
1 Set the sound output jack of the
TV to “Variable”.
2 Adjust the volume of the unit
according to the TV.
The above settings 1 and 2 allow
you to control the volume of the
unit by adjusting the TV volume.
Note
If sufficient volume level cannot be obtained from
the unit when the sound output jack of the TV is set
to “Variable”, set the sound output jack of the TV to
“Fixed” and adjust the volume of the unit.
Listening to TV sound Control the volume of the unit
by adjusting the TV volume