Filter
Top Products
Troubleshooting
31
GB
One of the following messages may appear or
flash in the display during operation.
CD/MP3
NO DISC
There is no disc in the player or you have loaded a
disc that cannot be played on this system (such as
DVD, VCD, or CD-ROM without MP3 audio
tracks, etc.).
NO STEP
All of the programmed tracks have been erased.
OVER
You have reached the end of the disc while pressing
M during playback or pause.
PUSH STOP
You pressed PLAY MODE during playback.
READING
The system is reading information of the disc. Some
buttons are not available.
STEP FULL
You tried to program 26 or more tracks (steps).
Tuner
COMPLETE
The preset operation ended normally.
Tape
NO TAB
You cannot record the tape because the tab has been
removed from the cassette.
NO TAPE
There is no tape in the tape deck.
Timer
PUSH SELECT
You tried to set the clock or timer during timer
operation.
SET CLOCK
You tried to select the timer when the clock is not
set.
SET TIMER
You tried to select the timer when the Play Timer or
Rec Timer are not set.
TIME NG
The Play Timer or Rec Timer start and end times are
set to the same time.
Other
NOT IN USE
You pressed an invalid button.
Messages