Filter
Top Products
24
GB
Other operations
Notes
• You cannot activate the Play Timer and the Rec
Timer at the same time.
• If you use the Rec Timer, the Play Timer and the
Sleep Timer at the same time, the Sleep Timer has
priority.
• If the system is on at the preset time, the Rec Timer
will not be activated.
• The volume is reduced to minimum during
recording.
• The Rec Timer is canceled automatically after the
Rec Timer has been activated.
The demonstration display (display window and
buttons lighting and flashing even when the
system power is off) and the clock display can
be turned off to minimize the amount of power
consumed during standby (Power Saving
Mode).
Press DISPLAY repeatedly while the
system is off until the demonstration
display or the clock display disappears.
To cancel Power Saving Mode
Press DISPLAY while the system is off. Each
time you press the button, the display switches
cyclically as follows:
Demonstration display t Clock display* t
No display (Power Saving Mode)
* The clock is displayed only if you set the clock.
Note
You cannot perform the following operations in Power
Saving Mode.
– setting the clock
– changing the AM tuning interval (except for
European, Russian and Saudi Arabian models)
– turning on the system by pressing the function
buttons (e.g., CD)
– changing the CD power manage function
Tips
• The timer continues to operate in Power Saving
Mode.
• ?/1 indicator lights up even in Power Saving Mode.
To Do this
Activate the timer/
Check the setting
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “REC
SELECT” appears, then
press ENTER.
Change the setting Start over from step 1.
Cancel the timer
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “TIMER
OFF” appears, then press
ENTER.
Display
Turning off the display
— Power Saving Mode